De-alcoholization system for Beer Wine & Seltzer
In the new decade that the new drinks becomes more thriving like RTD, seltzer, N-A beer & some pre-mixed spirits. So we’re also leveraging such opportunities and launch more qualified products and enrich the menus on the taps and bring much more new initiative & vitality.
In comparison with original method for drawing the alcohol from beer through the distilling principle that SKE new tech- RO membranes type are launched now.
ميزة
- Lower investment, the config of RO filtration based de-alcoholization is much simple than the distilling one, The cost-effective is also become much higher.
- Small footprint, The mainframe dimensions would like 1.3 * 1.2 * 1.3m with skid design, Much convenient for small scale working purpose.
- Applicability: Dedicated for the craft brewery scale with flexible capacity like from 1HL/h volume and up to 10HL+/h. Paralleled membranes easily to regulate the output capacity.
- Energy saving: No extra energy consumption, The product are run though at environment temp without heating requirement, Based on your locally like in tropic that the in-line tubular HX provide the process cooling function.
- Flexibility: Dual product created by filtration process, NA-beer & Seltzer.
- User-friendly & high-automation process control, All controls go through the PLC programming.
- Efficiency: Processed product ABV below 0.5, Be able to much lower by extending the dia-filtration process or replacing with high precision membranes.
Config
Buffer / Retentate tank
It should be a pressurized tank with level sensor to supervise and maintain the inside level in processes like during dia-filtration etc. We’ll also carbonating the product during filtration and it will also have some interaction with the De-Alco unit by monitoring the level . pressure etc and controlled by the PLC unit. Based on different spec that will also probably finish the dilution & carbonation process and however we accept 100% customization and dedicated figure out the tailored solutions for your purpose.
Permeate
As per option and you can collect the permeate as per seltzer / disinfectant by distill or just drain.
Membrane
The precise RO membranes are the international branding with multiple option as per different filtration precision or the output capacity, The beer before into system need to be filtered <kieselguhr> for preventing the membranes damage & block from the particles, impurities or yeast. The membranes number are calculated as per final output and come with 2 type for #8040 #8080. In the proper working condition the lifttime would be start from 36months and also depend on the real working load & conditions.
Hygienic Centrifugal pumps
Two pumps incl for product supply pump & boost pump, Both comes with VFD and capacity calc as per system capacity.
Options for Inline-fine filter, provide the 2اختصار الثاني guarantee of the membranes protection. And the in-line tubular heat exchanger for product cooling during the circulated filtration without dia-filtration process <aim to get the seltzer with higher ABV>. In-line mixier for the better blending between Retentate & de-aerated water during dia-filtration, Also the option for the in-line carbonator.
Control
All go through the PLC + HMI automation. All the data and process like de-aerated water flow rate, pressure, amount, Boost pump running pressure, the balance between dilution & permeating are all pre-set & supervised by the programming and be able to provide a duty-off operation and service.
CIP
All hard pipeworks & fittings are totally under the two separated CIP loop, One dedicated for the membranes and 2اختصار الثاني one for the rest.
SKE also provide the one-stop service not just de-alco unit, also includes the auxiliary equipment like de-aerated water skid, in-carbonation system etc.
We’re keen hear from you and figure out your own solutions for any kind of soft drinks or the alcohol products.
Arabic 
English 
Dutch 
French 
Spanish 
Italian 
German 
Japanese 
Portuguese 
Russian 
