Multi Effect Waterdestilleerder
Multi-effect water distiller adopted the purified water as the feed water, produced WFI (water for injection) by heating industrial steam. Eagle’s LDS series Multi Effect Still adopted the purified water as the feed water, produced WFI by heating industrial steam. The product satisfies the requirement of USP,EP and JP.
Working principle
- Qualified feed water will pump into the condenser after increased the pressure by multistage centrifugal pump.
- Then pump into each preheaters.
- Get into 1st stage evaporator, spray into internal of heater to create film flow, heated by industry steam to create pure steam & water mixture.
- Pure steam and water mixture go through Steam Separator.
- Non condensate water will move to 2nd stage evaporator. Pure steam will be heating medium for 2nd stage evaporator.
- Pure steam from last stage mix with condensate from each stage evaporator ( except from 1st stage), discharge non condensate gas, become WFI after feed water analyzer.
Specifications
Parameters
- Wet side Stainless Steel 316L, electropolish, Ra≤0.2um
- Advanced PLC Control System
- Automatic CIP
- Easy assembly and disassembly
- Low point drain to make sure no residual.
- Automatic sterilize function when start up after long term stop.
- No dead legs
- Energy saving
- Double tube sheet for evaporator, preheater and condenser of 1st effect to avoid cross contamination.
Dutch 
English 
French 
Spanish 
Arabic 
Italian 
German 
Japanese 
Portuguese 
Russian 
